Troubleshooting Windows boot issues after performing a Bare Metal Recovery - x360Recover

Written By Tami Sutcliffe (Super Administrator)

Updated at August 17th, 2021

In the event that your recovered system does not boot, or a Blue-Screen error message appears on startup, it may be necessary to recreate the Windows boot records on the hard drive.

To recreate the Windows boot records on the hard drive:

  1. Boot the system from a Windows operating system disc.
  2. Click Next on the language selection page.



  3. Click the Repair your Computer link. 

     
  4. In the Choose an Option screen, click the Troubleshoot button.



  5. In the Advanced Options screen, click the Command Prompt button.



  6. In the command shell, use DOS commands to switch between disks to identify which drives are present, and to locate the recovery partition if it exists. This will likely be on C:. The recovery partition will likely appear to be empty, but will have a hidden folder named BOOT.
  7. Change directory into /BOOT to verify that it exists.
  8. Within BOOT, rename the existing BCD file.

    For example: move BCD BCD.old

  9. Run the following commands to replace the boot records
    bootrec /fixmbr (Only for systems using legacy MBR BIOS, not UEFI systems)
    bootrec /fixboot
    bootrec /RebuildBcd
  10. Select Yes when prompted for Windows instances to install.
  11. Reboot and verify that the system boots normally.


SUPPORT  | 720-204-4500 | 800-352-0248

  • To learn more about any of our Axcient products,  sign up for free one-on-one training.
  • Please contact your Partner Success Manager or Support if you have specific technical questions.
  • Subscribe to the Axcient Status page for a list of status updates and scheduled maintenance.